D-Tek Select Leak Detector

The D-Tek Select is an accurate, highly sensitive, cordless refrigerant leak detector. Using an innovative infrared absorption sensing cell that is extremely sensitive to all refrigerants – and only refrigerants, the D-Tek Select maintains sensitivity over time for consistent, accurate and reliable performance.

Improving on job site productivity, this advanced Leak Detector’s offers a cell life for approximately 800 hours. The cell does not weaken over time so response remains consistent and accurate. The cell cannot be overloaded or ‘poisoned’ by exposure to large amounts of refrigerant. As the cell is selective to refrigerants only it will not react to smoke, humidity, airflow or temperature changes.

In addition, the high efficiency air sampling pump provides quick response and quick zeroing, while the on-board diagnostics indicate charging status and warn of low battery or infrared cell failure.

The D-Tek Select Leak Detector is suitable for use with all refrigerants including R-22, R134a, R404a, R410a, R507 (AZ-50) and all CFC’s, HCFC’s and HFC’s.

• F GAS Compliant tested to BSEN14624
• Ultra high sensitivity, 1gm/yr.
• 10 times the life of the original D-Tek sensor.
• Equally sensitive to all gases R22, R410a, R404a, R134a, and all CFC, HCFC's and HFc's.
• Rechargeable, NIMH power sticks.
• Infrared does not weaken with time.
• 800 hour infrared cell life.
• Will not react with air flow or smoke, 1gm/yr sensitivity.
• 24 month Limited Warranty (see instruction manual for full warranty conditions)

Pricing available on request. Submit an enquiry (below) or call 01642 232880 and speak to one of our consultants for details.