Refrigeration & Stainless Steel Hose
-
TurboFlow Vacuum & Charging Kit
This complete charging and evacuation kit, is designed to handle all high-pressure referigerants and not to collapse or permeate under vacuum pressure.
• Truly universal to work with any vacuum pump with a 3/8” connection
• All products are vacuum rated so no leaks can occur when in ultimate vacuum
• All products are restriction free for complete TurboFlow state
• Significantly reduce evacuation times compared to a set up with a manifold and ¼” hoses
• Can be used on all standard refrigerants to efficiently and quickly charge HVAC systems
• All items available available to buy seperately -
Veloci-Tee 3/8”
Veloci-Tee is universal to work with any vacuum pump with a 3/8” connection, and is vacuum rated so no leaks. The restriction free design of the ports means a significant reduction in evacuation times compares with traditional methods. Compatible with all standard refrigerants bringing extra speed and efficiency.
-
Turbo Flow Vacuum Hoses
KEY FEATURES:
• Large bore vacuum and charging hose
• Designed specifically to increase speed, flow and efficiency when using vacuum pumps and refrigerant charging via the 3/8th access fittings
• Available in 60” (1525mm) and 72” (1828.8mm) lengths
• Connections: 3/8” x 3/8” and 3/8” x 1/4”
• Teflon sealed
• Used for all vacuum and refrigerant charging procedures -
Refrigerant Ball Valve Set Back Hoses
-
Refrigerant Ball Valve Hoses
-
Standard Hoses and Gasket Remover Pick
-
Javac refrigerant hose sets 72″
JAVAC Refrigerant hose set 72” (x3).
Available in 5/16” and 1/4” connections.
Standard and Ball Valve options.
Teflon gaskets. -
Safe Seal Charging hoses
Patented Safe Seal technology: ‘One-Touch’ design allows you to screw the fitting on to the system before starting refrigerant flow, avoiding refrigerant loss and risk of ‘refrigerant burn’. Then simply turn the knob to start/stop flow.
• 72” hose (183cm), Suitable for standard refrigerants.
• The safety swivel sleeve allows free rotational movement of the hose without the fitting coming loose being put under unnecessary strain and preventing unwanted leaks -
Supahose
- PTFE / Stainless Steel Braided Hose
- 1/4” SAE Connection, id 6.25 mm od 9.25 mm
- R22, R134A, R404A, R407C
- Max. Pressure / Temperature: 260 Bar / 260°C
*Not recommended for use with Co2 systems due to potential incompatibility with oil additives that may be used in those systems.
Join our mailing list
CONTACT US TODAY TO DISCUSS YOUR REQUIREMENTS
No matter what your requirements, JAVAC can tailor a solution to fit your needs. Talk to JAVAC.